Soft starter 90kW 380V CMC-LX

Send Inquiry
Soft starter 90kW 380V CMC-LX
Details
Product Overview CMC-LX - series low voltage soft starter is a new type of motor starting and protection device that combines power electronics technology, microprocessor and automatic control. It can start/stop the motor smoothly without step, avoiding...
Category
Installation for starting and controlling motors
Share to
Description

 

Product overview

 

CMC-LX - series low voltage soft starter is a new type of motor starting and protection device that combines power electronics technology, microprocessor and automatic control. It can start/stop the motor smoothly, without a step, avoiding the mechanical and electrical shock caused by the use of traditional based on the use of direct starting, △/g starting, auto-reducing clutch starting, etc. and can effectively reduce the starting current and capacitance distribution, avoiding the investment of increasing power. At the same time, CMC-LX series soft starters are equipped with a built-in current transformer, so users do not need external connection.

 

Terms of Use

 

Control power supply

External type

A.C.110~220V±15%,50/60Hz,Pmax=30W

Built-in type

Internal built-in control power supply, no external connection required

Three-phase power supply

Standard wiring AC380V±15%, internal triangle wiring AC380V±15%

Rated current

18~1000A, total 22 ratings

Applicable engine

conventional AC induction motor with cage type rotor

Ramp launch method

Start of voltage rise, start of current rise

Parking method

free stop, soft stop

Logic input

Resistance 1.8KOM, supply voltage +24 V

Start frequency

Can run frequently or infrequently, it is recommended to run s10 once an hour

Protection function

Phase loss, Overcurrent, Short circuit, Protection

using thyristors, Overheating, Unbalanced phase current

Protection level

IP00,IP20

Cooling method

natural cooling or forced air cooling

Installation method

Wall mounting

Communication method

Rs485(optional)

Environmental conditions

For use at altitudes above 2000m above sea level, a corresponding power reduction is required.

The ambient temperature should be between -25 and +45 degrees C.

At a relative air humidity of no more than 95% (at a temperature of 20±5 degrees C).

Does not contain flammable, explosive, corrosive gases, conductive dust; indoor installation, good ventilation, vibration less than 0.5 G.

 

Note: All micro (M1) softstart control power supplies are external and RS485 communication is standard.

 

Hot Tags: soft starter 90kw 380v cmc-lx, China soft starter 90kw 380v cmc-lx Manufacturers, Suppliers, Factory

Send Inquiry