Soft starter 380V 11kW CMC-HX

Send Inquiry

Details

CMC-HX - series low voltage soft starter is a new type of intelligent induction motor starting and protection device. It is a terminal motor control device that integrates starting, indication, protection and data acquisition. Users can perform more complex control functions using fewer components, and the display of Chinese and English interfaces makes operation easier. At the same time, the CMC-HX soft starter is equipped with a built-in current transformer, so the user does not need to use an external transformer.

Rated voltage: 380V	Adaptation power: 7.5-530 kW
Rated voltage: 660V	Adaptation power: 15-700 kW
Rated voltage: 1140V	Adaptive power: 22-995kW

Terms of Use

Control power supply	AC110-220V±15%,50/60Hz
Three-phase power supply	Standard wiring AC380V±15%, internal triangle wiring AC380V±15%
Rated current	18~1000A, total 22 ratings
Applicable engine	conventional AC induction motor with cage type rotor
Launch method	Exponential voltage curve, linear voltage curve, exponential current curve, linear current curve
Parking method	free stop, soft stop, braking when braking, braking when braking
Logic input	Resistance 1.8KOM, supply voltage +24 V
Start frequency	Can run frequently or infrequently, it is recommended to run no more than 10 times per hour.
Protection function	Over current, overload, underload, over temperature, phase, three phase unbalanced current, phase order check, motor over temperature, frequency error
Protection level	IP00,IP20
Cooling method	natural cooling or forced air cooling
Installation method	Wall mounting
Environmental conditions	For use at altitudes above 2000m above sea level, a corresponding power reduction is required. The ambient temperature should be between -25 and +45 degrees C. At a relative air humidity of no more than 95% (at a temperature of 20±5 degrees C). Does not contain flammable, explosive, corrosive gases, conductive dust; indoor installation, good ventilation, vibration less than 0.5 G.