TDMK series synchronous motors

T series synchronous motorsDMK

Electric motors of the TDMK series from the Sima - brand are large high-power synchronous electric motors, specially designed for harsh industrial operating conditions. They are characterized by high reliability, stable operation and long service life, ideal for driving large-sized heavy machinery such as mills, rolling mills, crushers and compressors in the metallurgy, mining, energy and heavy engineering industries.

•Electric motors of this series allow direct starting at full voltage. The rated voltage is 6 kV or 10 kV; upon customer request, a 3 kV option can also be supplied; rated supply frequency - 50 Hz, rated power factor - 0,9.

•The℃of protection of the housing of electric motors of the - series is IP00, at the customer’s request can be made according to IP20; cooling method - IC01, installation type - IM7311.

•Electric motors are designed to operate in enclosed spaces at an altitude of no more than 1000 m above sea level, at an ambient temperature no higher than 40 degrees, with a low dust content, without steam and corrosive gases (acid, alkaline, etc.).

•Excitation method: the excitation system of electric motors of this series is equipped with a thyristor exciter.

•Sub bearings: oil -ring bearings or compound bearings are used. Insulating spacers are placed between the stand bearings and the base to prevent the occurrence of axial currents.

•Stator terminals: There are six terminals, respectively labeled U1, V1, W1, U2, V2, W2. Outputs are carried out by high-voltage rubber cables through terminal clamps located in the lower part of the steel.